MICRO BIOCIDE Cooling Water
Also known as: GREEN MICROBIOCIDE, MICROORGANISM CONTROL, Rocide BC 601, BIOCIDE INDION- 7705, Ferrocid 8583 MAXTREAT 606 CHEMICAL, Hydrex 7310, Aquatreat 2348, MAXTREAT 651, NALCO 77352, Hydrex 7908, Maxtreat 608, Nalco 2593, Indion 1591, Non Oxidising Biocide, Maxtreat 613, CareTreat 5 Seawater 25 Ltr, Aquatreat 411,HYDREX 7908, MAXTREAT 635, INDION 9040, SPECTRUS NX 1164, Biocide Chemical for Chilled Water, Biocide ITA, BIO GUARD 40H06 HYGEINE SOLUTION, M 401 Non- Oxidizing Biocide
Effective controller of MICRO BIOCIDE and BACTERIA from condensor WATER system. being effective against most kinds of bacteriaa, algae and fungi. It is a particularly useful product for air-wash systems and is compatible with all commonly used antifoulants and corrosion inhibitors . For the control of microbial biofilms, bacteria, algae, and fungi, add MICRO BIOCIDE Cooling Water RXSOL-40-4009-025 to industrial recirculating water cooling towers, industrial recirculating closed loop water cooling systems, brewery pasteurizer and can warmer systems.
Application
Microbiocide based on Organo sulphur compound, for use in open recircurculating systems.
* Highly effective
* Broad spectrum activity
* Economical and easy to use
* Compatible with other treatments.
Procedure
Routine dosage of MICRO BIOCIDE Cooling Water RXSOL-40-4009-025 IS 50 to 100ppm. based on the total water capacity of the system. Dosage will be necessary once or twice per week depending on the severity of the problem.
For badly fouled systems, initial higher dosage of 100-150 ppm. should be given for the first week or two.
The calculate quantity of biocide should be added directly to the system at any convienient point.
Precautions
For the control of microbial biofilms, bacteria, algae, and fungi, add MICRO BIOCIDE Cooling Water RXSOL-40-4009-025 to industrial recirculating water cooling towers, industrial recirculating closed loop water cooling systems, brewery pasteurizer and can warmer systems. Add MICRO BIOCIDE Cooling Water RXSOL-40-4009-025 at some point in the system to ensure uniform mixing.
Dose Ratio of MICRO BIOCIDE Cooling Water RXSOL-40-4009-025
NOTE: Badly fouled systems should be cleaned before treatment.
INITIAL DOSE: if the system is initiating fouling then use 200 ml - 3 ltr of MICRO BIOCIDE Cooling Water RXSOL-40-4009-025 for per 3000 to 5000 Ltr of water in the system.) Dose can be increased till optimum results. WEEKLY CONTROL DOSE: When microbial control is evident, add 100 to 500 ml per MICRO BIOCIDE Cooling Water RXSOL-40-4009-025 for per 3000 to 5000 Ltr of water in the system AIR WASHER SYSTEMS : Add to the air washer sump or chill water sump to insure uniform mixing, 200 ml - 3 Ltr of MICRO BIOCIDE Cooling Water RXSOL-40-4009-025 for per 3000 to 5000 Ltr of water in the system, DOSE ration directly proportional of contamination to control microbial biofilms, bacteria, fungi, and algae which cause fouling in industrial air washer systems.
Dose Ratio of MICRO BIOCIDE Cooling Water RXSOL-40-4009-025 for CONTINUOUS FEED METHOD
Maintain this treatment level by adding a continuous feed of 100 ml to 1000 ml of MICRO BIOCIDE Cooling Water RXSOL-40-4009-025 per 1000 gallon of makeup water).
NOTE : Badly fouled systems must be cleaned before initial treatment. Dose Ratio of MICRO BIOCIDE Cooling Water RXSOL-40-4009-025 for INDUSTRIAL WASTEWATER TREATMENT SYSTEMS AND SEWAGE SYSTEMS
INITIAL DOSE for Noticeably Fouled Condition: 500 ml - 4000 ml of MICRO BIOCIDE Cooling Water RXSOL-40-4009-025 per 3000 Ltr of water in the system. Repeat until control is achieved. Badly fouled systems should be cleaned before treatment is begun.
SUBSEQUENT DOSE: When microbial control is evident, add 100 ml - 100 ml MICRO BIOCIDE Cooling Water RXSOL-40-4009-025 per 3000 Ltr of water in the system.
Useful areas
Equivalaent Product Name GREEN MICROBIOCIDE, MICROORGANISM CONTROL, Rocide BC 601, BIOCIDE INDION- 7705, Ferrocid 8583 MAXTREAT 606 CHEMICAL, Hydrex 7310, Aquatreat 2348, MAXTREAT 651, NALCO 77352, Hydrex 7908, Maxtreat 608, Nalco 2593, Indion 1591, Non Oxidising Biocide, Maxtreat 613, CareTreat 5 Seawater 25 Ltr
Industries
38249022
Notes
- Ready-to-use liquid – convenient dosing with no on-site preparation
- Easy handling and feeding – simple integration into treatment programs
- Broad-spectrum efficacy – effective against bacteria, algae, and biofilm-forming organisms
- Unaffected by organics – maintains performance in the presence of organic matter
- Environmentally responsible – degrades naturally without long-term accumulation
- Treatment compatible – works well with other cooling water chemicals
- Rapid dissipation in activated sludge – minimizes impact on biological treatment systems
Supply locations
MICRO BIOCIDE Cooling Water manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai Abudhabi, Sharjah UAE, Muscat Oman, Kenya Africa. Get the best quality of MICRO BIOCIDE Cooling Water at a competitive price from us. We have ready stock of MICRO BIOCIDE Cooling Water in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.