RXSOL POTABLE WATER TEST KIT is used for testing potable water, whether supplied from shore side or produced onboard. It is recommended that potable water be tested weekly, (or as may be required by the federal or Port Administration) as well as when potable water is taken onboard. Manual reading should be recorded on a chart or log and retained onboard for at least 12 months.

Feature : 

RXSOL POTABLE WATER TEST KIT contains everything needed to monitor the drinking water onboard in accordance with WHO guidelines. The kit measures pH, free and total chlorine, plus total coliforms and E.coli bacteria. Because variation in the pH level can affect chlorination, it is important to monitor and control the pH. Additionally, potable water should be free of bacteria that are harmful to humans. Testing for coliform bacteria determines whether or not harmful bacteria are present. The test is an important safety measure, especially when potable water is loaded in port.

Chlorine testing is done using the DPD  Activator solution is used to determine total chlorine (the sum of free and combined chlorine). Chlorine level is determined using kit  and a visual color comparator . Presence/absence test for simultaneous detection of total coliforms and E.coli is done by using Coliform kit.

It should be noted that the sample must be incubated 18-24 hours at 34.5 °C to 37 °C.

Test Kit Contents

RXSOL POTABLE WATER TEST KIT -

pH Test Kit complete set along with Buffer Solution.
Chlorine Test Kit  Complete Set with Color Comperator.
Coliform Test Kit DA (Dechlorinating Agent) Complete et.

1.      Portable Water Quality Testing kit:- Designed to carry out more than six basic tests to measure the quality of drinking water quality – turbidity, free – chlorine, total chlorine, pH, color, microbiological and temperature tests; kit should include start- upreagents; kit to be potable and suitable for field ; with 44^o C incubator chamber for analysis of faecal coliforms , internal battery, sealed within the case housing, which can be re-charged from mains or a car battery; membrane filtration unit using 47mm – 0.45mm pore size membrane filters; with basic incubator in pelican case, Turbidity tube; Colorimeter; Sterile Pastuer Pipettes (3ml) for easy transfer of media x10, filter funnel, aluminium gasket, bronze discs x2, 3 sets of 16 petri dises, O- ring x2; complete kit weight:10 kg, Dimension: 34.4cm X 16.4cm X 29.7cm,

2.      Free- chlorine Reagent:-  100 tests pack for use with free- chlorine testing equipment provided water quality testing.

3.      pH Reagent:- Reagent suitable for 100 tests pack for use with pH testing equipment provided in potable water quality testing kit.

4.      Electric Autoclave (4L Capacity):- Steam sterilizer autoclave; made of high quality aluminium / stainless steel fixed with safety valves; fitted with pressure and temperature indicator, pressure valves; maximum pressure: 0.1MPa; maximum temperature: 125^o C.

5.      De- ion Pack:- De- ionizer pack cable of producing 5 liters of de- ionized water.

6.      Media for Microbiological Testing:- To be membrane lauryl sulphate broth; To be used in the potable water quality testing  kit for bacteriological analysis; with minimum if one year shelf life; Membrane filtration culture medium for the enumeration of coliform organisms and E. Coil in water and sewage samples; dehydrated culture medium; 500 g per bottle or container.

7.      Absorbent Pads And Membranes: To be used in microbiological water quality testing incubator; 0.45pm; 47mm; Sterile, white and gridded; Round for microbiological petri 47mm diameter; Minimum of 100 pieces per rack;.

8.      Pure White Vinegar ( Acetic acid, 5% concentration by volume) 500ml: Clear Colorless solution; wt./ml at 20^o C : 1.047-1.052g: Freezing point: Not below 15.5^o C: Non-volatile matter.

POTABLE WATER TEST KIT manufacturer and supplier in India - Mumbai, Kandla, Chennai, Kolkata, Visakhapatnam, Gandhidham, Haldia, Paradip, Oman Sohar, Muscat, Barka, UAE Middle East Dubai, Sharjah, Ajman, Abudhabi, Gulf, Canada